Table of content
Published on: 29.05.2024 | updated on: 29.05.2024
A clear phone case not only shows off your phone’s amazing design and color but also protects it from any scratches or cracks. However, these phone cases can accumulate dirt and stains over time, making your device look dull or dirty. Regularly cleaning these phone cases can make them look new and help maintain their longevity. In this article, we’ll talk about various methods of how to clean your dirty phone case, ensuring it remains shiny and transparent.
Cleaning your clear phone case doesn’t require any fancy products—just some items you probably already have at home. A bit of mild soap and warm water will do the trick for everyday dirt. If your case has tougher stains or has started to yellow, you can use baking soda, vinegar, or rubbing alcohol to give it a deeper clean. Just be sure to avoid harsh chemicals or anything abrasive that might scratch the case. Cleaning your case every couple of weeks will help keep it looking great. And don’t forget to dry it thoroughly before putting it back on your phone to prevent any moisture damage.
Clear phone cases are a top choice for users who want to admire their phones' beauty and sleekness without compromising on protection against drops and falls. But, while clear phone cases are great, they get dirty faster and can make your phone look dull and dirty.
Listed below are all the different ways how to make a clear phone case clear again:
Put warm water in a bowl or a box and add a few dish soap drops.
Take a toothbrush and scrub the phone case while submerged in the water.
Keep submerging the case in water to clean it properly.
Use a microfiber cloth to dry the case, then put your phone in it.
Place your phone over a cloth or a towel and sprinkle baking soda all over the case.
Take a toothbrush, soak it with water, and thoroughly scrub the baking soda.
Keep scrubbing until a paste forms. For best results, scrub in circular motions and pay extra attention to heavily stained areas.
Rinse the baking soda away and repeat the process for the other side.
Once done, rinse the case and pat it dry using a towel.
Take a container that fits your phone and place it inside.
Put baking soda over the case and pour white vinegar until fully submerged. You will notice the fizzing but do not be alarmed.
Let the case soak for a few hours.
Now rinse the case and pat it dry with a towel or a microfiber cloth.
Take a microfiber cloth and pour some rubbing alcohol on it.
Clean the case by wiping it down with a microfiber cloth. In case you have alcohol swipes, it will work just fine as well.
Once you are satisfied, pat the case dry with a clean microfiber cloth.
One of the biggest problems with clear cases is that they turn yellow after some time. If you are facing the same issues, here is how to clean a yellow phone case;
Take a cup of water and heat it until it is lukewarm.
Now mix some baking soda and put the mixture in a bowl along with the phone.
Let the case sit for half an hour, then rinse it and pat it dry.
You can also apply toothpaste to the stained areas and scrub it for 2 to 3 minutes.
Next, rinse it and pat it dry.
Your yellow case is now clear to use.
Here is how is how to clean a phone case that has turned brown;
You'll need dish soap, baking soda, an old toothbrush, and a soft cloth.
Mix two tablespoons of baking soda with one tablespoon of water to make a paste.
Use the toothbrush to apply the paste on the brown areas of your phone case.
Scrub the case gently with the toothbrush to lift the dirt.
Rinse the phone case under warm water and dry it with a soft cloth.
Here is how to clean a phone that has turned black;
Take dish soap and mix it with water to create a lather.
Dip the phone case into the mixture.
Gently scrub the black areas of the phone case with a soft toothbrush.
Once done, rinse the phone case under running water and dry it thoroughly with a clean cloth.
Here is how to clean a white phone case;
Mix a few drops of dish soap with warm water.
Add a tablespoon of baking soda to create a paste for tougher stains.
Dip the toothbrush in the cleaning solution or apply the paste directly onto the stained areas.
Use the toothbrush to scrub the phone case gently.
Rinse the phone case under clean water and dry thoroughly with a soft cloth.
Here is how to clean a colored phone case;
Take warm water and mix it with dish soap.
Now dip a soft cloth in the soapy water and gently wipe the phone case to remove dirt and stains.
Use an old toothbrush to scrub stubborn spots gently. Once done, rinse the phone case with clean water and dry it thoroughly.
Here is how to clean a stained phone case;
Mix two tablespoons of baking soda with a tablespoon of vinegar to form a paste.
Use a soft toothbrush to apply the paste directly onto the stains.
Let the paste sit on the stains for about 5-10 minutes.
Now, gently scrub the stains with the brush.
Then rinse the case thoroughly and dry it with a clean cloth.
Here is how to clean a sticky phone case;
Put a small amount of rubbing alcohol or hand sanitizer on the cloth and use it to wipe the sticky areas thoroughly.
After the sticky residue is removed, wash the phone case in soapy water to ensure all alcohol or sanitizer is removed.
Next, rinse the phone case under clean water and dry it completely with another soft cloth.
Here is how to clean the silicone phone case;
Mix a few drops of dish soap with warm water in a bowl.
Dip a soft cloth in the soapy water and gently wipe the entire surface of the phone case to remove any surface dirt and stains.
For tougher stains or built-up grime, sprinkle some baking soda on the areas and use the soft-bristled brush to scrub these spots gently.
Next, rinse the phone case under warm water to remove all soap and baking soda residue.
After rinsing, pat the phone case dry with a clean, dry cloth.
Here is how to clean a yellow silicone phone case
Mix two tablespoons of baking soda with just enough water to form a paste. Add a few drops of hydrogen peroxide to the paste for enhanced cleaning power, especially for tough stains or significant discoloration.
Apply the paste over the yellow silicone case using a toothbrush.
Let the paste sit on the case for 5-10 minutes, then gently scrub it with a toothbrush.
Next, rinse the phone case and dry it with a soft cloth.
Cleaning a leather case is relatively easy; here is what you need to do;
Take a bowl and pour in some water and hand soap to create a soapy mixture.
Next, use a cloth or a toothbrush and wet it with the mixture.
Clean the dirty areas of the case using a cloth or a toothbrush, and let it dry for a few hours.
Here is how to clean a plastic phone case;
Create a mixture of warm water and dish soap.
Dip a soft cloth in the mixture and gently clean the plastic case.
After scrubbing, rinse the case to remove soap and wipe it with a dry cloth.
Here is how to clean a rubber phone case;
Take a bowl, pour in water, and mix a few drops of dish soap into it.
Now submerge a cloth into the mixture and scrub your phone case with it.
For difficult stains, create a baking soda paste using hot water and let it sit on the phone case for a few minutes.
Then rinse the case and pat it dry.
If your phone case has gone dirty, don’t worry; here is how you can clean a transparent phone case;
Prepare a cleaning solution by mixing a few drops of dish soap with warm water.
Dip a soft cloth into the soapy solution and gently wipe down the transparent phone case.
After cleaning, rinse the phone to remove any residue.
Dry the case with a clean microfiber cloth, ensuring no moisture is left inside or around the edges.
For stubborn stains or discoloration, you can use a small amount of rubbing alcohol on a cotton swab or a soft-bristled brush and gently scrub the affected areas.
Rinse and dry the phone case again after using rubbing alcohol.
Listed below are the steps to clean a fabric phone case;
Use a soft-bristled brush to brush away dirt or debris from the fabric surface gently.
Mix a small amount of laundry detergent or dish soap with warm water to prepare a solution.
Dip a clean, soft-bristled toothbrush into the cleaning solution and gently scrub the fabric phone case in small circular motions.
Rinse the phone case under lukewarm running water to remove any soap residue or dirt.
Lay the phone case flat on a clean towel and allow it to air dry completely before using it again.
For tough stains, you can try spot-cleaning with a small amount of diluted white vinegar or rubbing alcohol applied to a clean cloth or cotton swab.
A clear phone case can also be used as a canvas to personalize your phone further. Here is what you can do with it;
Wrap decorative tapes around the edges of the case or create designs and patterns on the back of the case.
Use stickers, decals, or vinyl cutouts to decorate the back of the case with your favorite characters, patterns, or designs. You can also draw designs or doodle directly onto the clear case using permanent markers or paint pens.
Carefully place pressed flowers, leaves, or dried plants between the phone and the clear case for a nature-inspired look.
Print out your favorite photos into Polaroids and place them in the case.
Here is how to wash a clear phone case;
Remove the case from your phone.
Fill a sink or bowl with warm water and add a small amount of dish soap.
Submerge the case in the soapy water and let it soak for 5-10 minutes.
Use a soft-bristled brush or a clean cloth to scrub the case gently.
Rinse the case and then dry it completely with a clean cloth.
If you are wondering how to clean a clear phone case with baking soda, here is how;
Create a paste by mixing baking soda and water in a small bowl.
Now, take a soft-bristled toothbrush and scrub the paste onto the case.
Let it sit for a few minutes. Then rinse the case thoroughly and dry it using a towel.
In case you don’t have baking soda, here is how to clean a clear phone case without baking soda;
Create a mixture of dish soap and water.
Dip a soft-bristled brush or a clean cloth into the solution and scrub the case.
Next, rinse the case and dry it.
Here is How to clean a clear phone case with toothpaste;
Apply a small amount of toothpaste onto a soft-bristled brush and scrub it onto the case.
Let the toothpaste sit for a few minutes, and then rinse the case.
Once done, dry the case using a fan or a towel.
Here is how to clean a clear phone case without vinegar;
Create a dish soap solution by mixing it with water.
Take a soft-bristled brush and wet it with the solution.
Scrub the phone case gently, paying extra attention to dirty or grimy areas.
Next, rinse and dry the case before putting it on your phone.
If you are tired of cleaning your phone case over and over again, here are some tips and tricks to keep your phone case clean;
To prevent discoloration, clean your clear phone case regularly, at least once a week, or whenever you notice it getting dirty.
Avoid placing your clear case in contact with items that have strong dyes, like jeans or colored plastic, which might transfer color onto your case.
Regularly use a soft microfiber cloth over the case to remove fingerprints, smudges, and light dirt.
Mix a few drops of dish soap with warm water in a small bowl or spray bottle and use it when your case requires deep cleaning. Make a paste with baking soda and water for tougher stains or discoloration.
Keep the case away from direct sunlight, as UV rays can cause discoloration over time.
If your clear phone case becomes heavily stained or discolored, it may be time to replace it with a new one.
Keeping your clear phone case clean isn’t difficult, but it makes a huge difference in how your phone looks and feels. With just a little effort and some basic cleaning supplies, you can keep your case looking crystal clear and new. Regular cleaning not only keeps your phone looking good but also helps your case protect your device. So, take a few minutes every now and then to clean your clear phone case and enjoy the fresh, clean look it brings to your phone.
Tech Writer | Photographer
LinkedIn: Madiha Khadim
Madi is a dynamic tech writer with a passion for simplifying complex concepts. Her expertise lies in creating clear and concise guides, blogs, manuals, and tutorials that empower users to navigate the technological landscape with ease. Throughout her career, Madi has worked with numerous leading tech companies, collaborating with engineers, developers, designers and marketers to create user manuals, FAQs, troubleshooting guides, and tech articles, on the websites such as "Technology Castle" and "Bilzimo". She can transform intricate technical jargon into user-friendly language, empowering users to understand and utilize products effectively.
State
Discover a stores nearby
Search by a zip code|city|state
Search in 17 partners, 9 state